Publications

Publications

2023

• Laflamme, S., Ubertini, F., Di Matteo, A., Pirrotta, A., Perry, M., Fu, Y., Li, J., Wang, H., Hoang, T., Glisic, B., Bond, L.J., Pereira, M., Shu, Y., Loh, K.J., Wang, Y., Ding, S., Wang, X., Yu, X., Han, B., Goldfeld, Y., Ryu, D., Napolitano, R., Moreu, F., Giardina, G. and Milillo, P. “Roadmap on measurement technologies for next generation structural health monitoring systems”, Measurement Science and Technology, 34(9):093001 (52p), 2023. DOI: 10.1088/1361-6501/acd135.
• Yosef, L. and Goldfeld, Y. “Effect of Matrix Electrical and Micro-Structural Properties on the Self-Sensory Capabilities of Smart Textile Reinforced Composites”, Journal of Building Engineering, 63:105909, 2023.
• Gaben, M. and Goldfeld, Y. “Enhanced self-sensory measurements for smart carbon-based textile reinforced cement structures”, Measurement, 210:112546, 2023.

2022

• Gaben, M. and Goldfeld, Y. “Self-Sensory Carbon-based Textile Reinforced Concrete Beams – Characterization of the Structural-Electrical Response by AC measurements”, Sensors and Actuators: A. Physical, 334:1-14, doi.org/10.1016/j.sna.2021.113322, February 2022.
• Perry, G. and Goldfeld, Y. “Smart self-sensory TRC pipe – Proof of Concept”, Smart Materials and Structures, 31:055011, doi.org/10.1088/1361-665X/ac5ed2, March 2022.
• Goldfeld, Y. and Roni, D. “Assessment of the bending stiffness distribution in plate like-structures based on spatially distributed strain data”, European Journal of Environmental and Civil Engineering, Vol. 26(10), pp. 4794-4810, 2022.
• Wang, G., Rosenfeld, Y. Drimer, N. and Goldfeld, Y. “Occupant comfort analysis for rigid floating structures – methodology and design assessment for offshore dwelling module”, Ships and Offshore Structures, Vol. 16(2), pp. 184-199, 2022

2021

• Perry, G., Dittel, G., Gries, T. and Goldfeld, Y. “Monitoring capabilities of various smart self sensory carbon-based textiles to detect water infiltration", Journal of Intelligent Material Systems and Structures, 32(20):2566-2581, doi.org/10.1177/1045389X211006901, April 2021.
• Perry, G. and Goldfeld Y. “Design Methodology for TRC pipes: Experimental and Analytical Investigations”, Materials and Structures, 54:181(1-20), doi.org/10.1617/s11527-021-01778-8, August 2021.
• Yosef, L., and Goldfeld, Y. “Smart Self-Sensory Carbon-based Textile Reinforced Concrete Structures for structural health monitoring”, Structural Health Monitoring, 20(5):2396-2411, doi:10.1177/1475921720951122, 2021.

2020

• Perry, G., Dittel, G., Gries, T. and Goldfeld, Y. "Mutual Effect of Textile Binding and Coating on The Structural Performance of TRC Beams", ASCE Journal of Materials in Civil Engineering, Vol. 38, No. 8, pp. 04020232 (1-9), August 2020.
• Goldfeld, Y., and Yosef, L. "Electrical-Structural Characterization of Smart Carbon based TRC Beams by Integrative Gauge Factors", Strain, 2020:e12344, doi.org/10.1111/str.12344.
• Wang, G., Drimer, N. and Goldfeld, Y. “Modular Floating Structures (MFS) for Offshore Dwelling a Hydrodynamic Analysis in the Frequency Domain”, Ocean Engineering, Vol. 216, pp. 1-18, November 2020.
• Goldfeld, Y. “Structural Modelling of Textile-Reinforced Concrete Elements under Uniaxial Tensile loading”, Composite Structures, Vol. 235, pp. 1-15, March 2020.

2019

• Goldfeld, Y. and Perry, G. “A-R Glass/Carbon-Based Textile Reinforced Concrete Elements for Detection Water Infiltration within Cracked Zones”, Structural Health Monitoring, Vol. 18(5-6), pp. 1383-1400, 2019.
• Wang, G., Goldfeld, Y. and Drimer, N. “Expanding coastal cities – Proof of feasibility for modular floating structures (MFS)”, Journal of Cleaner Production, Vol. 222, pp. 520-538, June 2019.
• Goldfeld, Y., and Yosef, L. "Sensing Accumulated Cracking with Smart Coated and Uncoated Carbon Based TRC", Measurement, Vol. 141, pp. 137-151, July 2019.

2018

• Goldfeld, Y. and Perry, G. “Electrical characterization of smart sensory system using carbon based textile reinforced concrete for leakage detection”, Materials and Structures, Vol. 51, No. 17, pp. 1-17, December 2018.

 

2017

• Goldfeld, Y., Quadflieg, T., Ben-Aarosh, S. and Gries, T. "Micro and macro crack sensing in TRC beam under cyclic loading ", Journal of Mechanics of Materials Structures, Vol. 12, No. 5, pp. 579-601, November 2017.
• Goldfeld, Y., Quadflieg, T. and Gries, T. “Sensing Capabilities of Carbon Based TRC Beam from Slack to Pull-Out Mechanism”, Composite Structures, Vol. 181, pp. 294-305, December 2017.

2016

• Goldfeld, Y., Rabinovitch, O., Fishbain, B., Quadflieg, T., and Gries, T. "Sensory carbon fiber based textile reinforced concrete for smart structures”, Journal of Intelligent Material Systems and Structures, Vol. 27, No. 4, pp. 469–489, March 2016.
• Goldfeld, Y., Ben-Aarosh, S., Rabinovitch, O., Quadflieg, T., and Gries, T. "Integrated Self-Monitoring of Carbon Based Textile Reinforced Concrete Beams under Repeated Loading in the Un-Cracked Region”, Carbon, 98, pp. 238-249, March 2016.
• Goldfeld, Y. Quadflieg, T., Gries, T. and Rabinovitch, O. "Smart textile reinforcement with embedded stainless-steel yarns for the detection of wetting and infiltration in TRC structures", Sensors and Actuators: A. Physical, Vol. 243, pp. 139-150, June 2016.

2001-2015

• Sheinman, I. and Goldfeld, Y. “Buckling of Laminated Cylindrical Shells in Terms of Different Shell Theories and Formulations”, AIAA Journal, Vol. 39, No. 9, pp. 1773-1781, September 2001.
• Sheinman, I. and Goldfeld, Y. “Imperfection Sensitivity of Laminated Cylindrical Shells According to Different Shell Theories”, ASCE Journal of Engineering Mechanics, Vol. 129, No. 9, pp. 1048-1053, September 2003.
• Goldfeld, Y., Sheinman, I. and Baruch, M. “Imperfection Sensitivity of Conical Shells”, AIAA Journal, Vol. 41, No. 3, pp. 517-524, March 2003.
• Sheinman, I. and Goldfeld, Y. "Shell Theory Accuracy Regard to Initial Post-buckling Behavior of Cylindrical Shell", AIAA Journal, Vol. 42, No. 2, pp. 429-432, February 2004
• Goldfeld, Y. and Arbocz, J. "Buckling of Laminated Conical Shells Given the Variations of the Stiffness Coefficients", AIAA Journal, Vol. 42, No. 3, pp. 642-649, March 2004.
• Goldfeld, Y. "The Influence of the Stiffness Coefficients on the Imperfection Sensitivity of Laminated Cylindrical Shells", Composite Structures, Vol. 64, No. 2, pp. 243-247, May 2004.
• Goldfeld, Y. and Sheinman, I. “Discontinuity in the Sensitivity Curves of Laminated Cylindrical Shells”, ASME Journal of Applied Mechanics, Vol. 71, No. 3, pp. 418-420, May 2004.
• Goldfeld, Y., Arbocz, J. and Rothwell, A. "Design and Optimization of Laminated Conical Shells for Buckling", Thin Walled Structures, Vol. 43, pp. 107-133, January 2005.
• Goldfeld, Y., Verenne. K., Arbocz, J. and Van Keulen, F. “Multi-Fidelity Optimization of Laminated Conical Shells for Buckling”, Structural and Multidisciplinary Optimization, Vol. 30, No. 2, pp. 128-141, August 2005.
• Goldfeld, Y. and Arbocz, J. “Elastic Buckling of Conical Shells Using a Hierarchical High-Fidelity Analysis Procedure”, ASCE Journal of Engineering Mechanics, Vol. 132, No. 12, pp. 1335-1344, December 2006.
• Goldfeld, Y. “Imperfection Sensitivity of Laminated Conical Shells”, International Journal of Solids and Structures, Vol. 44, Issue 3-4, pp. 1221-1241, February 2007.
• Goldfeld, Y. “Elastic Buckling and Imperfection Sensitivity of Generally Stiffened Conical Shells”, AIAA Journal, Vol. 45, No. 3, pp.721-729, March 2007.
• Goldfeld, Y. “Identification of the Stiffness Distribution in Statically Indeterminate Beams”, Journal of Sound and Vibration, Vol. 304, Issues 3-5, pp. 918-931, July 2007.
• Goldfeld, Y. and Ejgenberg, E. A.[1] “On the Different Formulations in Linear Bifurcation Analysis of Laminated Cylindrical Shells”, International Journal of Solids and Structures, Vol. 44, Issues 25-26, pp. 8613-8626, December 2007.
• Goldfeld, Y. “An Alternative Formulations in Linear Bifurcation Analysis of Laminated Shells”, Thin Walled Structures, Vol. 47, Issue 1, pp.44-52, January 2009.
• Goldfeld, Y. “A Direct Identification Procedure for Assessment of the Stiffness Distribution”, Engineering Structures, Vol. 31, No. 5, pp. 1068-1076, 2009.
• Goldfeld, Y. “Mixed Formulation for Sensitivity Analysis of Laminated Conical Shells”, AIAA Journal, Vol. 49, No. 8, pp. 1816-1819, August 2011.
• Goldfeld, Y. and Elias, D. “Using the exact element method and modal frequency changes to identify distributed damage in beams”, Engineering Structures, Vol. 51, pp. 60-72, June 2013.
• Goldfeld, Y. and Klar, A. “Damage Identification in Reinforced Concrete Beams using Spatially Distributed Strain Measurements”, ASCE Journal of Structural Engineering, 139, No. 12. pp. 04013013 (1-12), December 2013.
• Goldfeld, Y. “Curvature-rate approach to the evaluation of the stiffness distribution in plate-like structures”, Journal of Sound and Vibration, Vol. 333, No. 19, pp. 4483-4498, September 2014.